MX-332 video frame grabber Frame Grabber Video Inputs
  • Up to 2 sets of 3 RS-170 inputs or up to 2 RGB inputs
  • High resolution camera support up to 4K x 4K
  • 10 bit video input A/D converters
  • Programmable PLL with up to 30 MHz digitization per channel
  • Signal to noise ratio of 60 dB
  • ±2.5 ns jitter
  • Video low pass anti aliasing filter (5 or 10 MHz)
  • Progressive scan camera support
  • Dual tap camera support (MX-332)
  • Programmable digital control of offset and gain
  • EEPROM for storing configuration and calibration settings

Frame Grabber Video Transfer and Display

  • PCI 2.1 compliant with bus mastering support
  • 100 MByte sustained PCI throughput
  • 32/24/16/15/8 bit RGB
  • YUV 4:2:2
  • Non destructive overlay support

Frame Grabber External Camera Control

  • Asynchronous trigger support
  • External H,V and pixel clock support
  • Long term integration support
  • 12 VDC fused output at 750 mA
  • Optically isolated output trigger for flash control

Frame Grabber External I/O Control

  • General purpose I/O control
  • RS-232 serial support
  • On board DSP
  • Programmable DAC output

Software

  • Windows 95, 98, ME, 2000, NT 4.0 and XP DLLs
  • Camera configuration software
  • FBG32 video capture application
  • DirectDraw support
  • Media Cybernetics Image Pro Plus drivers
  • Vision Blox drivers
  • HALCON drivers
  • TWAIN drivers
  • Video for Windows (AVI) drivers
  • Optional SDK with sample code

Ordering Information

  • Part No. 3140 - FlashBus MX 132 = $ 875.
  • Part No. 3144 - FlashBus MX 132R = $ 975.
  • Part No. 3142 - FlashBus MX 332 = $ 1,475.
  • Part No. 3470 - FlashBus MX SDK = $ 595.
MX-332 video frame grabber
MX-332 video frame grabber
The FlashBus MX frame grabber comes with a Windows based camera configuration application allowing the setup of specific board parameters and camera functions.
Feature
MX-332
MX-132R
MX-132
Video DMA Channels
3
1
1
RGB Inputs (total)
1 (2)
1 (2)
None
RS-170 (B/W) Inputs (total)
3 (6)
1 (2)
1 (2)
General Purpose I/O
8
8
8
High Resolution Support
Y
Y
Y
Planar Mode Capture Support
Y
N
N
Progressive Scan Support
Y
Y
Y
Dual Tap Camera Support
Y
N
N
H,V and PCLK Inputs
Y
Y
Y
Asynchronous Trigger Support
Y
Y
Y
Flash Interface
Y
Y
Y
On Board DSP
Y
Y
Y
RS-232 Support Y Y Y
Programmable DAC Output Y Y Y
12 Volt Fused Output Y Y Y
Programmable Sync Generator Y Y Y
Please contact JKN Electronics Inc. with any questions or to place your Order by calling (508) 966-2721.

Specifications subject to change without notice. All other trademarks are held by their respective owners.