Bus Mastering Performance
Taking advantage of its high speed PCI bus mastering capabilities, the FlashBus MX-332 frame grabber delivers consecutive frames of video in real time into system or display memory without intervention from the host CPU. The FlashBus MX-332 can sustain PCI bus transfers at 100 MBytes/sec to system memory.

Simultaneous Capture
The FlashBus MX-332 frame grabber was designed around a flexible FPGA architecture allowing up to three video DMA channels. The FlashBus MX-332 utilizes all three video channels, allowing for the display and capture of a single RGB or three simultaneous high resolution monochrome inputs.

High Resolution Camera Support
Each video channel on the FlashBus MX-332 is fully programmable for support of non standard video at resolutions up to 4K x 4K. With video channel sampling rates up to 30 MHz, the FlashBus MX-332 also supports a wide variety of progressive scan cameras. Each video channel contains a 10 bit A/D converter, a programmable LUT and video signal conditioning to provide clean and accurate acquisition. Each channel can be set to capture at different resolutions and can capture an area of interest of the full image.

Programmable Intelligence
The FlashBus MX-332 incorporates on board intelligence to assure robust triggering and accurate timing. Its camera control interface provides support for asynchronous trigger and long term exposure functions. The FlashBus MX-332 also adds RS-232 support, a programmable sync generator, a 0V to 10V programmable DAC output and a 12 VDC fused output. These on board features can be used to provide easy integration of specific camera functions without the need for separate control or power supplies.

Ordering Information
Please contact JKN Electronics Inc. with any questions or to place your Order by calling (508) 966-2721.