CAMERA LINK FRAME GRABBERS

The Euresys Grablink Value Camera Link frame grabber is recommended for single camera systems, base configuration, 24-bits at up to 60 MHz. It has a 32-bit 33MHz PCI bus, 8 MBytes of on board memory and 4 I/O lines. It supports base configuration, monochrome or Bayer 1 tap x (8-10-12-14-16 bits), 2 taps x (8-10-12 bits) and color RGB 1 tap x (24 bits). Full height, half length PCI card form factor. It includes MultiCam driver software. Download the Grablink Value Technical Specifications.    Download the Grablink Series List of Supported Cameras.

  The Euresys Grablink Avenue Camera Link frame grabber is recommended for single camera area scan and line scan systems, base and extended base configurations, 24-bits at up to 85 MHz. It has a 64-bit 66MHz 3V/5V PCI bus, 32 MBytes of on board memory and 9 I/O lines. It supports base configuration, monochrome or Bayer 1 tap x (8-10-12-14-16 bits), 2 taps x (8-10-12 bits) and color RGB 1 tap x (24 bits). It also supports extended base configuration, monochrome or Bayer 2 taps x (14-16 bits) and 4 taps x (8 bits). Full height, half length PCI card form factor. It includes MultiCam driver software. Download the Grablink Avenue Technical Specifications.    Download the Grablink Series List of Supported Cameras.

  The Euresys Grablink Express Camera Link PCI Express (PCIe) frame grabber is recommended for single camera area scan and line scan systems at a maximum pixel clock frequency of 24-bits at up to 85 MHz. It features a 1-lane (x1) PCI Express interface offering a large bandwidth of 180 Mbytes per second. This 1-lane board is "universal" and as such is compatible with all PCI Express connectors. Full height, half length PCI Express card form factor. The Grablink Express also has 32 MBytes of on board memory and 9 I/O lines. It supports the Camera Link 1.2 Base Configuration including PoCL (Power over Camera Link). It includes MultiCam driver software. Download the Grablink Express Technical Specifications.    Download the Grablink Series List of Supported Cameras.

The Euresys Grablink Value cPCI Camera Link frame grabber is recommended for single camera systems, base configuration, 24-bits at up to 60 MHz. It has a 64-bit 66MHz compact PCI (cPCI) bus, 8 MBytes of on board memory and 4 I/O lines. It supports base configuration, monochrome or Bayer 1 tap x (8-10-12-14-16 bits), 2 taps x (8-10-12 bits) and color RGB 1 tap x (24 bits). 6U/4HP cPCI (compact PCI) card form factor. It includes MultiCam driver software. Download the Grablink Value cPCI Technical Specifications.    Download the Grablink Series List of Supported Cameras.

The Integral Technologies FlashBus DX-CL Camera Link frame grabber is a low-cost, single input camera PCI bus frame grabber. The FlashBus DX-CL is compatible with 8, 10, 12, 14 and 16 bit monochrome area scan cameras as well as 24 bit RGB area scan cameras with Camera Link output. Pixel clock rates of up to 40 MHz are supported. The included Camera Configurator Wizard software facilitates interfacing to your particular Camera Link camera. The Camera Configurator Wizard software is Windows 98/ME/NT/2000/XP compatible. Download the FlashBus DX-CL Technical Specifications.

The Integral Technologies FlashBus DX-CL2 Camera Link frame grabber allows dual inputs from two asynchronous Camera Link area scan cameras to be captured simultaneously. Each input can be from either 8 or 10 bit monochrome cameras. The FlashBus DX-CL2 is equipped with dual DMA channels for simultaneous acquisition from two video sources with pixel clock rates of up to 40 MHz. Acquisition from a single camera is supported the same as the FlashBus DX-CL version above. The included Camera Configurator Wizard software facilitates interfacing to your particular Camera Link camera. The Camera Configurator Wizard software is Windows 98/ME/NT/2000/XP compatible. Download the FlashBus DX-CL Technical Specifications.